Displacement 12.5 L Engine Model Cat C13 Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final, and Japan 2014 emission standards. Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

Note ? Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m? (7.1 yd?) general purpose bucket with BOCE. Operating Weight 30344kg

Forward - 1 6.9km/h Forward - 2 13.3km/h Forward - 3 23.5km/h Forward - 4 39.5km/h Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. Reverse - 1 7.8km/h Reverse - 2 15.2km/h Reverse - 3 26.9km/h Reverse - 4 39.5km/h

Note (1) ** For machines in European Union countries and in countries that adopt the ?EU Directives.? Note (2) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 109 With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72dB(A) With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 112dB(A) With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 78 With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

Breakout Force 227kN Note (1) For a machine configuration as defined under ?Weight.? Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Static Tipping Load - Full 40° Turn - No Tire Deflection 46208lb Static Tipping Load - Full 40° Turn - With Tire Deflection 19706kg

Cooling System 52l Crankcase 37l Differential - Final Drives - Front 84l Differential - Final Drives - Rear 84l Fuel Tank 426l Hydraulic Tank 153l Transmission 77l

Implement System - Maximum Operating Pressure 34300kPa Implement System - Maximum Pump Output at 2,250 rpm 449l/min

Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Centerline of Rear Axle to Edge of Counterweight 2661mm Centerline of Rear Axle to Hitch 1900mm Ground Clearance 456mm Height - Top of Exhaust Pipe 3764mm Height - Top of Hood 3064mm Height - Top of ROPS 3829mm Hinge Pin Height at Carry 682mm Hinge Pin Height at Maximum Lift 4775mm Lift Arm Clearance at Maximum Lift 4125mm Overall Length - Without Bucket 8355mm Rack Back - Carry Height 50 degrees Rack Back - Maximum Lift 61 degrees Rack Back at Ground 40 degrees Tread Width 2440mm Wheel Base 3800mm Width over Tires (Loaded) 3260mm

Centerline of Rear Axle to Edge of Counterweight 2661mm Centerline of Rear Axle to Hitch 1900mm Ground Clearance 1.5ft Height - Top of Exhaust Pipe 12.5ft Height - Top of Hood 10.1ft Height - Top of ROPS 12.7ft Hinge Pin Height at Carry 682mm Hinge Pin Height at Maximum Lift 14.11ft Lift Arm Clearance at Maximum Lift 12.8ft Overall Length - Without Bucket 26.1ft Rack Back - Carry Height 50 degrees Rack Back - Maximum Lift 61 degrees Rack Back at Ground 40 degrees Tread Width 2440mm Wheel Base 12.6ft Width over Tires (Loaded) 3260mm

Bucket Range 4.0-14.5 m³ 5.25-19 yd³