Bore 98mm Displacement 3.6l Emissions Engine meets Tier 4 Final/Stage V emission standards. Engine Model Cat C3.6 Maximum Gross Power 82kW Maximum Gross Power - ISO 14396 82kW Maximum Gross Power - ISO 14396 (metric) 112HP Maximum Gross Power - Rated Engine Speed 1800r/min Maximum Gross Torque - ISO 14396 450N·m Maximum Gross Torque - SAE J1995 454N·m Maximum Net Torque - ISO 9249 443N·m Maximum Net Torque - SAE J1349 446N·m Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Rated Net Power - ISO 9249 73kW Rated Net Power - Rated Engine Speed 2200r/min Rated Net Power - SAE J1349 74kW Stroke 120mm

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3) Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Maximum Flow - Steering Pump 66l/min Maximum Working Pressure - Steering Pump 18500kPa Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns Steering Articulation Angle - Each Direction 40° Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2s

Operating Weight 8109kg

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s Hydraulic Cycle Time - Rackback 2.2s Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s Hydraulic Cycle Time - Total Cycle Time 12.5s Maximum Flow - Implement Pump 122l/min Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 90l/min Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90l/min Maximum Working Pressure - Implement Pump 23500kPa Relief Pressure - Tilt Cylinder 34000kPa Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000kPa Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000kPa

Axles - Front Center Differential 7.5l Axles - Rear Center Differential 7.5l Cooling System 21.5l Diesel Exhaust Fluid (DEF) Tank 18l Engine Crankcase 10l Fuel Tank 165l Hydraulic System - Including Tank 98l Hydraulic Tank 55l Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Transmission 3.2l

Forward and Reverse - Speed Range 1* 10km/h Forward and Reverse - Speed Range 2* 20km/h Forward and Reverse - Speed Range 3 40km/h Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Note (1) Other tire choices are available. Contact your Cat dealer for details. Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow Standard Size 15.5 R25 L2 XTLA

FOPS EN ISO 3449:2008 (ISO 3449:2005) Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). Note (4) *The measurements were conducted with the cab doors and windows closed. ROPS ISO 3471:2008

Front Fixed; Locking differential (standard) Rear Oscillating ±11 degrees; Locking differential (Standard)