Engine
Bore
170mm
Displacement
78l
Emissions Rating
U.S. EPA Tier 1
Engine Model
Cat® 3516B HD
Gross Power - SAE J1995
1801kW
Net Power - SAE J1349
1743kW
Note (1)
3516E engine currently offered as optional attachment upgrade.
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Rated Speed
1750r/min
Stroke
215mm
Weights - Approximate
Body Weight
30700kg
Chassis Weight
121984kg
Nominal Rated Payload
232t
Note (1)
Consult your tire manufacturer for maximum tire load
Note (2)
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Rated Gross Machine Weight
383848kg
Weight Distributions - Approximate
Front Axle - Empty
46%
Front Axle - Loaded
33%
Note
Weight distributions optimized with Cat body.
Rear Axle - Empty
54%
Rear Axle - Loaded
67%
Final Drives
Differential Ratio
1:08:01
Planetary Ratio
16:01
Total Reduction Ratio
28.8:1
Type
Double reduction, planetary with full floating axles.
Transmission
Forward - 1
11.8km/h
Forward - 2
15.9km/h
Forward - 3
21.5km/h
Forward - 4
29km/h
Forward - 5
39.4km/h
Forward - 6
54.3km/h
Reverse
10.9km/h
Top Speed - Loaded
54.3km/h
Tires
Note (1)
Quick Change Rims (QCR) and Extended Life Wheel Station (XLWS) optional.
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Rims
29" x 57"
Standard Tires
40.00 R57
Braking System
Front Wet Disc Brake Surface Area
89817cm²
Load Brake
Rear service brakes
Parking Brake
Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Rear - Wet Disc Brake Surface Area
34500cm²
Service Brakes
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Standards
Service and Secondary: ISO 3450:1996
Capacity - HP Body - 100% Fill Factor
Heaped (SAE 2:1)*
162-191 m³ / 212-250 yd³
Note (1)
Consult your local Cat dealer for body recommendations.
Struck
112.6-151 m³ / 147-197.5 yd³
Body Hoists
Body Lower Time - Float
19.26s
Body Power Down - High Idle
17.51s
Body Raise Time - High Idle
20.25s
Pump Flow - High Idle
846l/min
Relief Valve Setting - Raise
20370kPa
Type
Twin, two-stage hydraulic cylinders with snubbing valve.
Suspension
Effective Cylinder Stroke - Front
130.5mm
Effective Cylinder Stroke - Rear
105.5mm
Rear axle - Oscillation
+/- 4.9º
Type
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Service Refill Capacities
Brake/Hoist Hydraulic Tank
769l
Brake Hoist System - Includes Tank
1375l
Cooling System
973l
Crankcase
265l
Differentials
832l
Final Drive - Each
114l
Front Wheels - Each
22l
Fuel Tank - Optional
4922l
Fuel Tank - Standard
4354l
Steering System - Including Tank
341l
Steering Tank
227l
Torque Converter - Transmission Sump
102l
Torque Converter/Transmission System - Including Sump
189l
Torque Converter Sump
102l
Cab
Air Conditioning
(HFC - 134A refrigerant) 35,100 Btu/h
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
Heater / Defroster
43930Btu/h
ROPS Standards (1)
The operator sound pressure level, 76 dB(A), is measured according to work cycle procedures specified in ANSI/SAE J1166 MAY90.
ROPS Standards (2)
ROPS (Rollover Protective Structure) meets ISO 3471:1994.
Steering
Steer Angle
36°
Steering Standards
ISO 5010:1992
Turning Diameter - Front
28.42m
Dimensions
Centerline Front Tire Width
5610mm
Centerline of Rear Dual Tire Width
4963mm
Dump Clearance
1631mm
Engine Guard Clearance
1294mm
Front Canopy Height
7375mm
Ground Clearance
1005mm
Height - Top of ROPS
5584mm
Inside Body Depth - Maximum
2330mm
Inside Body Length
7712mm
Inside Body Width
7300mm
Loading Height - Empty
6189mm
Operating Width
7680mm
Outside Body Width
8007mm
Overall Body Length
12862mm
Overall Canopy Width
8592mm
Overall Height - Body Raised
13714mm
Overall Length
13589mm
Overall Tire Width
7605mm
Rear Axle - Clearance
1128mm
Rear Axle - Tail
3997mm
Wheel Base
5905mm